Magnets

We feature a complete selection of magnets for all scrap yard and mill use. Cast shell. Generators, controls, rectifiers, reels, connectors and magnet cable with parts shipped daily. Full manufacturing and repair facilities. Send us your repairs, or burn-outs for trade-in! Special combination grapples with magnets also available.

For more information, or to place an order, please Contact Us.

CANMAG

CANMAG
  • Heavy cast steel shell. Thick ribs for extra protection.
  • Standard with deep field aluminum coil.
  • Extra thick  manganese steel bottom plate.
  • Fully protected terminals with protective lid and plug in leads
  • Copper coils available.
  • High quality alloy steel chain assembly.
CANMAG
Magnet Size
Magnet Weight
Electrics at 230 volts direct current
28" / 710 mm 950 lbs / 435 kgs 12 cold amps 2.6 KW Required
36" / 900 mm 1650 lbs / 750 kgs 19 cold amps 4 KW Required
41" / 1045 mm 1950 lbs / 880kgs 29 cold amps 6.7 KW Required
45" / 1145 mm 2300 lbs / 1040kgs 34 cold amps 7.8 KW Required
48" / 1220mm 2750 lbs / 1250 kgs 42.5 cold amps 10 KW Required
57" / 1445mm 3950 lbs / 1790 kgs 62.5 cold amps 15 KW Required
68" / 1725mm 5970 lbs / 2710 kgs 83 cold amps 20 KW Required
** Larger sizes and special extra heavy duty mill models available.
** A full range of rectangular magnets for billets, plate, etc.
Extra Heavy Duty Mill Magnets
• Extra Heavy Duty Mill Magnets

Heavy Duty rectangular magnets
available with hot work bottom plate

 •
Heavy Duty rectangular magnets

Magnet Accessories

We offer a full array of accessories:
  • Generators—Belt drive and deisel driven GenSets
  • Rectifiers—All sizes available
  • Magnet Cable and Connectors
  • Controls and Switch Gear
DynasetDYNASET
DYNASET is supplied as a complete system to provide 230 volts DC for magnet operation including generator, electronic automatic switches for off/on and lift/drop functions.

Supplied with a full valve package for your machine. Suitable for all hydraulic systems: constant output pumps, variable displacement or load sensing systems. Proven on most systems and excavators.

Available in 3.5 to 30 KW systems. Features Include:
  • Constant voltage regardless of engine RPM or machine function.
  • Safe 12 or 24 volt control circuit.
  • Fast drop circuit standard, with full clean discharge.
  • Weatherproof design.
  • Trained technician available for installation
  • Simple, single push button controls magnet function (can be mounted in joy stick)
  • No low voltage relays required. No large mechanical switches and contactors.


FULL PARTS & SERVICE

FULL MANUFACTURING AND REPAIR FACILITY

Send us your burnouts.
We accept trade-ins.

For more information, or to place an order, please Contact Us.

[ About IGM | Buy & Sell Metals | Recycling Equipment | Recycling Recources & Information ]
[ Contact Us ]

Copyright © 2003 International Global Metals, Inc. All rights reserved.